The different sorts of candle making molds accessible to purchase for home candle creating are practically as numerous as the candles you can get. It is logical to imagine that with a well-liked passion such as candle making along with the substantial amount of people receiving candles to use at home, that there would be lots of distinctive varieties of candle making molds to buy.

Essentially candle molds are only containers used to hold poured candle making wax as it cools. As soon as the wax has cooled completely it will keep the molds appearance and can be cautiously removed.

Candle molds are made from a variety of materials and come in a variety of shapes and sizes. All these variations allow them to offer a choice of diverse uses, aluminium molds for example are a widespread variety of mold that candle makers make use of since they are very robust and heat resistant. They also have the advantage of giving the completed candle a smooth finish because they don't leave any seams, this provides the appearance that the candle has been professionally made.

These varieties of metallic molds are generally used in making pillar and votive candles. When compared with rubber molds though, they are fairly inexpensive and are also very easy to clean. Position them upside down on an oven baking sheet next heat the oven to approximately 150 degrees, this lets any extra wax to melt and run from the mold and onto the baking sheet. Then again a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another disadvantage is that to extract the completed candle from the mold you will most likely have to use a releasing agent.

Rubber molds such as latex, silicone and polyurethane though are extremely flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and unfortunately can have a strong odour that may taint your candle. Again a releasing agent maybe required to help out withdrawing the candle from the mold. Taper and pillar candles are regularly created from polyurethane molds. Silicone molds, due to their excellent qualities are probably the most expensive; they are flexible and are able to stretch to a point, making it a lot less difficult to extract the candle from the mold without the use of a releasing agent.

The use of latex molds seems to be losing its attraction lately because of the developments and advancements being created with the other kinds of rubber molds. In spite of this, the use of latex has the distinct benefit of permitting you to make your own stunning mold designs. Using liquid latex it is possible; by means of painting repeated layers of the latex on an object you can make an endless quantity of unique molds.

The most economical type of mold is made of plastic as it can be very simply mass produced, though because they tend to be brittle they can have a short lifespan. Having said that, you will discover plastic molds are pretty easy to clean with a little hot soapy water. Make sure the mold is absolutely dry prior to using it another time as water bubble marks might materialize on the surface of the candles. They are brilliant for novices to use because of their availability and low cost, but as you develop in your hobby the other types of mold outlined will provide your candle creating more of a professional edge.

Candles Pictures


If you would enjoy any additional general guidelines on how to choose the best candle making molds or if you would prefer further guidelines on

Share This Page

About The Author

Related Pages

Connect With Ubscure

Print This Article